Digital Image Correlation of strike slip experiments in wet kaolin at different strain rates and boundary conditions
Cite as:
Cooke, Michele; Elston, Hanna; Chaipornkaew, Laainam (2021): Digital Image Correlation of strike slip experiments in wet kaolin at different strain rates and boundary conditions. V. 1. GFZ Data Services. https://doi.org/10.5880/GFZ.fidgeo.2021.029
Status
I N R E V I E W : Cooke, Michele; Elston, Hanna; Chaipornkaew, Laainam (2021): Digital Image Correlation of strike slip experiments in wet kaolin at different strain rates and boundary conditions. V. 1. GFZ Data Services. https://doi.org/10.5880/GFZ.fidgeo.2021.029
Abstract
The data set includes the digital image correlation of 16 dextral strike-slip experiments performed at the University of Massachusetts at Amherst (USA). The DIC data sets were used for a machine learning project to build a CNN that can predict off-fault deformation from active fault trace maps. The experimental set up and methods are described with the main text and supplement to Chaipornkaew et al (in prep). To map active fault geometry and calculate the off-fault deformation we use the Digital Image Correlation (DIC) technique of Particle Image Velocimetry (PIV) to produce incremental horizontal displacement maps. Strain maps of the entire region of interest can be calculated from the displacements maps to determine the fault maps and estimate off-fault strain throughout the Region of Interest (ROI). We subdivide each ROI into five subdomains, windows, for training the CNN. This allows a larger dataset from the experimental results. The data posted here include the incremental displacement time series and animations of strain for the entire ROI.
Methods
We document the evolution of dextral strike-slip faults within wet kaolin loaded within a split box. All experiments used a 2.5 cm claybox but we varied 1) the loading rate from 0.25 to 1.5 mm/min, and the localized or distributed basal shear (abutting basalt plates or 2.5 cm wide elastic sheet respectively). All experiments were repeated twice. Red and black sand grains distributed on the surface of the clay provide the pixel variation that allow us to calculate the incremental horizontal displacement fields from the photos of the clay surface using DIC techniques. The distribution of sand and timing of photos are set to optimize both data resolution and displacement uncertainty. allows for <0.01 mm uncertainty of horizontal displacement between successive images of our experiment measured at points with spacing of 1 mm.
We use the matlab based PIVlab (Thielicke,2019) with a fast Fourier transform three-pass filter to optimize displacement resolution. Through the three passes with linear interpolation, the initial window size of 64 pixels reduces to 16 pixels, which corresponds to incremental displacement data every 0.89 mm. The resulting displacements vary along the edges of the ROI far from faults with mean standard of deviation of <0.01 mm. We consider this to be the uncertainty of the incremental displacements.
CharacterString: The data set includes the digital image correlation of 16 dextral strike-slip experiments performed at the University of Massachusetts at Amherst (USA). The DIC data sets were used for a machine learning project to build a CNN that can predict off-fault deformation from active fault trace maps. The experimental set up and methods are described with the main text and supplement to Chaipornkaew et al (in prep). To map active fault geometry and calculate the off-fault deformation we use the Digital Image Correlation (DIC) technique of Particle Image Velocimetry (PIV) to produce incremental horizontal displacement maps. Strain maps of the entire region of interest can be calculated from the displacements maps to determine the fault maps and estimate off-fault strain throughout the Region of Interest (ROI). We subdivide each ROI into five subdomains, windows, for training the CNN. This allows a larger dataset from the experimental results. The data posted here include the incremental displacement time series and animations of strain for the entire ROI.
pointOfContact
CI_ResponsibleParty
individualName
CharacterString: Cooke, Michele
organisationName
CharacterString: University of Massachusetts, Amherst, US
CI_OnLineFunctionCode (codeList=http://www.isotc211.org/2005/resources/Codelist/gmxCodelists.xml#CI_OnLineFunctionCode codeListValue=http://www.isotc211.org/2005/resources/Codelist/gmxCodelists.xml#CI_OnLineFunctionCode_information): information
CharacterString: We document the evolution of dextral strike-slip faults within wet kaolin loaded within a split box. All experiments used a 2.5 cm claybox but we varied 1) the loading rate from 0.25 to 1.5 mm/min, and the localized or distributed basal shear (abutting basalt plates or 2.5 cm wide elastic sheet respectively). All experiments were repeated twice. Red and black sand grains distributed on the surface of the clay provide the pixel variation that allow us to calculate the incremental horizontal displacement fields from the photos of the clay surface using DIC techniques. The distribution of sand and timing of photos are set to optimize both data resolution and displacement uncertainty. allows for <0.01 mm uncertainty of horizontal displacement between successive images of our experiment measured at points with spacing of 1 mm.
We use the matlab based PIVlab (Thielicke,2019) with a fast Fourier transform three-pass filter to optimize displacement resolution. Through the three passes with linear interpolation, the initial window size of 64 pixels reduces to 16 pixels, which corresponds to incremental displacement data every 0.89 mm. The resulting displacements vary along the edges of the ROI far from faults with mean standard of deviation of <0.01 mm. We consider this to be the uncertainty of the incremental displacements.
Released
Dataset
Abstract
;University of Massachusetts, Amherst, US
Files
